Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: [phone] Fax: [phone] www.ebacusa.com
proven performAnCe
The EIPL CD60 dehumidifier is a stand alone solution
to your humidity problem. The unit is supplied with a
pre-wired, remote humidistat, extra long power cord and
long condensate tube. This preassembly makes the
installation process simplistic, thereby reducing the
overall installation and project cost. The high efficiency
Rotary compressor ensures the maximum extraction
with the lowest running costs. Fully adjustable
feet ensure the unit can be leveled quickly and
accurately.
the DehumiDifier
EIPL dehumidifiers are effective solutions to environmental control problems. The CD ranges of units
are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air
through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which
cools the air below its dew point. Moisture forms on the evaporator coil and is
collected in the condensate tray, which is equipped with an internal condensate
pump for easy removal of collected moisture. The cooled air then passes through
the hot condenser coil where it is reheated using the same energy removed during
the cooling phase, plus the additional heat generated by the compressor. The air
is, therefore, discharged from the dehumidifier at a slightly higher temperature with
a lower absolute humidity than that which entered. Continuous circulation of air
through the dehumidifier gradually reduces the relative humidity within the area.
Because the CD ranges of units are equipped with an internal humidistat, they
automatically switch on and off to save energy and expense by maintaining the
desired level of humidity with intermittent operation.
The additional features of the CD60 make the unit the ideal choice for
installations where remote humidistat mounting is required. The
high capacity condensate pump ensures the unit is capable
of pumping water from basements or to higher
drainage points.
the problem
Excess humidity in your crawl space, warehouse, office,
factory or shop results in corrosion, mold growth and
rotting. Enormous costs are incurred every year through
damage to inventory and through inflated building
maintenance costs as a result of dampness. Even if your
building seems dry during the day, at night when the
temperature falls the humidity rises and the condensation
process begins. The compact physical size and high
performance, makes the CD60 is the ideal choice for
areas which require humidity control.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications CD60
Model No. 10264FR-US
Offices
4
Laboratories
4
Basements
4
Storage Areas
4
Restaurants
4
Applications CD60
Model No. 10264FR-US
Bars
4
Museums
4
Locker Rooms
4
Computer Rooms
4
Basements
4