Brochure
Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: (757) 873-6800 Fax: (757) 873-3632 www.ebacusa.com
proven perFormAnce
The EIPL CD425 range of dehumidifiers are
“standalone”unitsthatcanhandletheextraload
encountered in the typical humid, industrial settings.
Under maximum conditions, the CD425 will
condense and remove up to 50 gallons of water
vaporperday–dayafterday.With“Reverse
Cycle” defrosting, this workhorse can function
smoothly in a cold, wet location, without the
limitations of frost buildup.
the DehumiDiFier
EIPL dehumidifiers are effective solutions to environmental control problems. The CD425 range
of units are high capacity dehumidifiers, made to operate at high efficiencies by removing
moisture from the air through the refrigeration process. The fan draws the moist
air through the cold evaporator coil, which cools the air below its dew point.
Moisture forms on the evaporator coil and is collected in the condensate tray,
which is equipped with an internal condensate pump for easy removal of collected
moisture. The cooled air then passes through the hot condenser coil where it
is reheated using the same energy removed during the cooling phase, plus the
additional heat generated by the compressor. The air is, therefore, discharged
from the dehumidifier at a slightly higher temperature with a lower absolute
humidity than that which entered. Continuous circulation of air through the
dehumidifier gradually reduces the relative humidity within the area.
Because the CD425 range of units are equipped with an internal
humidistat, they automatically switch on and off to save
energy and expense by maintaining the desired level
of humidity with intermittent operation.
the problem
Excess humidity in your crawl space, warehouse,
office, factory or shop results in corrosion, mold growth
and rotting. Enormous costs are incurred every year
through damage to inventory and through inflated
building maintenance costs as a result of dampness.
Even if your building seems dry during the day, at night
when the temperature falls the humidity rises and the
condensation process begins. The compact physical
size, and high performance, makes the CD425 the
ideal choice.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. Astheairiscooled,it’smoisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
hoW A DehumiDiFier WorKs
Applications CD425 CD425 CD425
Model No. 1018110 1018125 1018150
Warehouse
4 4 4
Basements -
4
-
Factories
4 4 4
Sports Halls
4 4 4
Storage Areas
4 4 4
Laboratories
4 4 4
Applications CD425 CD425 CD425
Model No. 1018110 1018125 1018150
Oil Rigs
4 4 4
Agriculture
4 4 4
Pumping Stations
4 4 4
Stadiums
4 4 4
Ships / Barges
4 4 4