Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: [phone] Fax: [phone] www.ebacusa.com
Proven PerformAnCe
The EIP CD35 dehumidifier is a compact, stand alone
unit which provides quiet, maintenance free service in
extreme environments, without the cost, and irritation
of coil freeze-up. This simple, yet effective solution is
ideal for a damp basement or clammy locker rooms it
can be is easily transported to the problem area, and
goes quietly to work.
The CD35P has all the qualities of the CD35;
however the integral water container is replaced
with a high capacity condensate pump. This unit
is ideal for un-manned installations.
the DehumiDifier
EIPL dehumidifiers are effective solutions to environmental control problems. The CD range of units are
high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air
through the refrigeration process The fan draws the moist air through the cold evaporator coil,
which cools the air below its dew point. Moisture forms on the evaporator coil and
is collected in the condensate tray, which is equipped with an internal condensate
pump for easy removal of collected moisture. The cooled air then passes through
the hot condenser coil where it is reheated using the same energy removed during
the cooling phase, plus the additional heat generated by the compressor. The air
is, therefore, discharged from the dehumidifier at a slightly higher temperature with
a lower absolute humidity than that which entered. Continuous circulation of air
through the dehumidifier gradually reduces the relative humidity within the area.
Because the CD ranges of units are equipped with an internal humidistat,
they automatically switch on and off to save energy and expense by
maintaining the desired level of humidity with intermittent operation.
The additional features of the CD35P make the unit the ideal
choice for un- manned installations, as the condensate
pump will pump the condensation into a toilet sink
etc.
the Problem
Excess humidity in your crawl space, warehouse, office
factory or shop results in corrosion, mold growth and
rotting. Enormous costs are incurred every year through
damage to inventory and through inflated building
maintenance costs as a result of dampness. Even if your
building seems dry during the day, at night when the
temperature falls the humidity rises and the condensation
process begins. The compact physical size, and high
performance, makes the CD35 family the ideal choice for
many applications.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. Astheairiscooled,it’smoisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications CD35 CD35P
Model No. 10186DG-US 10186DP-US
Warehouse
4 4
Basements
4 4
Water Damage Restoration
4 4
De-Flooding
-
4
Sports Halls
4 4
Storage Areas
4 4
Laboratories
4 4
Applications CD35 CD35P
Model No. 10186DG-US 10186DP-US
Oil Rigs
4 4
Agriculture
4 4
Kitchens
4
-
Pumping Stations
-
4
Hotel / Motel
4 4
Stadiums
4
-
Ships / Barges
4
-