Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: [phone] Fax: [phone] www.ebacusa.com
proven performAnCe
Under the operating conditions of 80°F and 60% Relative
Humidity (AHAM standard, baseline used to compare
the performance of industrial dehumidifiers), the
CD30-S / CD30-SE units will remove more than 24
pints of harmful water vapor each day, additionally,
nearly 4 gallons per day can be efficiently removed in
an extreme environment.
The CD30-S / CD30-SE units are definitely not
“anotherprettyface”buttough,selfsufficient
performers
the DehumiDifier
EIPL dehumidifiers are effective solutions to environmental control problems. The CD ranges of units are high
capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the
refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air
below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, before
draining away though the condensate drain tube. Inorder for the water to flow in a gravity drainage
system, the unit must be mounted higher than the drain. The cooled air then passes through
the hot condenser coil where it is reheated using the same energy removed during the
cooling phase, plus the additional heat generated by the compressor. The air is, therefore,
discharged from the dehumidifier at a slightly higher temperature with a lower absolute
humidity than that which entered. Continuous circulation of air through the dehumidifier
gradually reduces the relative humidity within the area. Because the CD ranges of units
are equipped with an internal humidistat, they automatically switch on and off
to save energy and expense by maintaining the desired level of humidity with
intermittent operation.
The additional features of the CD30-SE make the unit the ideal choice for
installations where remote monitoring is required. The alarm humidistat
can be adjusted and preset during the installation process and will
provide means of identifying a high humidity condition. This
unit is also supplied complete with a wall mount bracket
and installation kit.
the problem
Excess humidity in your crawl space, warehouse, office
factory or shop results in corrosion, mold growth and rotting.
Enormous costs are incurred every year through damage to
inventory and through inflated building maintenance costs as
a result of dampness. Even if your building seems dry during
the day, at night when the temperature falls the humidity rises
and the condensation process begins. The compact physical
size, and high performance, makes the CD30-S family the
ideal choice for small spaces.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. Astheairiscooled,it’smoisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications CD30-S CD30-SE
Model No. 1142000 1142050
Crawl Spaces
4
-
Warehouse
4 4
Basements
4 4
Factories
4 4
Water Damage Restoration
4
-
Sports Halls
4
-
Storage Areas
4 4
Laboratories
4 4
Applications CD30-S CD30-SE
Model No. 1142000 1142050
Oil Rigs
4 4
Agriculture
4
-
Kitchens
4
-
Pumping Stations
4 4
Hotel / Motel
4
-
Stadiums
4 4
Ships / Barges
4
-