Brochure

SpecificationS includeS:
SpecificationS
10224gD-gB 10224gg-gB 10224gp-gB
BD75 DV BD75 BD75-p
Height (mm) 620 620 620
Width (mm) 385 385 385
Depth (mm) 360 360 360
Weight (kg) 27 25 25
Voltage (V) 110/230 230 230
Phase 1 1 1
Frequency (Hz) 50 50 50
Power (kW) 0.46 0.46 0.46
Current (A) 4/2 2 2
Airow (m
3
/hr) 170 170 170
E󰀨ective Volume (m
3
) 100 100 100
Typical Running Costs (p/hr) 3 3 3
Typical Extraction (30/80%RH)(lt/d) 12 12 12
Min Operating Temperature (°C) 3 3 3
Max Operation Temperature (°C) 35 35 35
featureS include:
featureS 10224gD-gB 10224gg-gB 10224gp-gB
BD75 DV BD75 BD75-p
ON/OFF Control
4 4 4
Moulded Carrying Handle
4 4 4
Castors
4 4 4
Electronic Defrost Timer
4 4 4
Refrigerant Type R134a R134a R134a
Dual Voltage
4
X X
Hot Gas Defrost
4 4 4
Gravity Drain
4 4
O
Internal Condensate Pump X X
4
Voltage Selector Switch
4
X X
Moulded Mains Plug X
4 4
Rotaional Moulded Body Base
4 4 4
Galvanised Steel Sub Frame
4 4 4
COLD WET AIR
WARM
DRY AIR
WATER DISCHARGE
cHooSe eip ltd deHuMidifier
Whether there’s a need for fast, reliable and energy-efficient drying,
EIP Ltd (Ebac Industrial Products Ltd) has the answer.
In new building construction, in renovation or alteration of existing
buildings, or in special circumstances such as flooding, there’s no
quicker, surer or more
economical way to
reduce moisture without
risk of damage to the
building materials.
Consider the
alternatives. Natural
drying will get the job
done – eventually. But
EIP Ltd Building Dryers
cut natural drying times
by two thirds. Drying can
also be achieved by wasteful
heating and venting – but at
what cost?
reliaBle perforMance
No matter how extreme the conditions, EIP Ltd’s efficiency copes
comfortably. All units operate economically even on the coldest winter
day – and where dampness is really severe, up to 20 litres of water can
be extracted from the atmosphere in just 24 hours using the BD70.
The EIP Ltd range of dryers are designed to cope with demanding
site conditions, spending their time on hire. Earning you money
year after year.
operational SiMplicitY
Simplicity of operation is one of the major benefits of the EIP Ltd range.
To dry out any building you need only to check that all doors and
windows are closed, wheel the unit to a convenient location, connect to
the supply and press the start button.
Drainage of condensate from the machine is equally simple – either by
connecting a hose to the drainage spout and leading it to a drain, or by
placing a container under the spout.
tHe inSide StorY
Air is drawn into the dehumidifier
by means of a fan. The moisture
is then condensed from the air
and piped away or collected
in a container. The dry air
is heated with the energy
recovered during the drying
phase and returned to the
room. This process lowers
the relative humidity of the
air, increasing it’s capacity to
absorb more moisture from
surrounding surfaces.
EIP Ltd has supplied building
dryers to plant hire shops for over
thirty years: if you have a building dryer it is
probably an EIP Ltd from Europe’s leading manufacturer.
ruGGed conStruction -
YearS of SerVice
Over thirty seven years of development experience has brought the EIP
Ltd range to its current peak of performance. Every machine is built for
efficiency and built to last – the popularity of EIP Ltd Dryers with the plant
hire trade speaks for their reliability, portability and outstanding durability
thanks to the heavy duty welded steel construction.
a VerSatile product
Differing circumstances present different problems – but EIP Ltd Building
Dryers have been designed to provide an effective solution whatever the
situation.
In newly built or partially completed buildings, EIP Ltd Dryers enable
interior plaster, screeds and timberwork to be dried at a controlled rate.
This means that decorators can work systematically, keeping to the
required schedule, regardless of weather conditions.
BD75 DEhUMIDIFIER
St Helen Trading Estate, Bishop Auckland, Co. Durham. DL14 9AD
Tel: [phone] Fax: [phone] Email: [e-mail] www.eipl.co.uk