Manual

UNPACKING
Thank you for deciding to purchase an
Ebac Industrial dehumidifier. Like the
many tens of thousands of people who
have already b
ought an Ebac
dehumidifier we a
re confident you will
find it is the most effective answer to the
problem of
condensation and dampness
related problems
IMPORTANT
Your Industrial dehumidifier is packed in
a plastic wrapping –
please ensure that it
is disposed of safely and where it will not
be a danger to children.
INTRODUCTION
Carefully remove the BD70 dehumi
difier
unit from it’s transit box and visually
check for any signs of transit damage. If
there is evidence of damage DO NOT
attempt to operate the unit, call your
supplier for advice. Retain the
packaging for further use, or dispose of it
considerately.
This user manual tells you how to use
the BD70 dehumidifier. Please read it
thoroughly before operating the
dehumidifier. If you have any questions
about the unit please contact our
Customer Service Department at the
address shown at the back of this
section or phone [phone].
Dehumidifiers remove moisture from the
air circulating through it.
Continuous operation reduces the
relative humidity of the air and this helps
prevent rust, rot, mould, mildew and
condensation within the room, or other
enclo
sed space where the dehumidifier
is used.
A dehumidifier consists of a motor –
compressor unit, a refrigerant
condenser, an air circulating fan, a
refrigerated surface, a means of
collecting and disposing of the
condensed moisture and a cabinet to
house these components.
GENERAL
Ebac industrial dehumidifiers can be
stored and transported in the horizontal
or vertical position. To operate, stand
the unit upright, connect power and it is
ready for operation.
When a generator is used to supply the
power
, it is essential to check the
minimum kva required in the technical
section within this manual. The
generator must be started before
connection is made to the dehumidifier.