Manual

SAFETY
• DO NOT USE THE UNIT IF THE
CABINET OR POWER CORD IS
DAMAGED.
• DO NOT INSERT OBJECTS
INTO ANY OF THE GRILLES ON
THE MACHINE.
• DO NOT COVER OR
OBSTRUCT AIRFLOW FROM
THE GRILLES
• DO NOT OPERATE THE UNIT
WITH THE COVERS REMOVED.
• DO NOT ATTEMPT ANY
REPAIRS SHOULD THE UNIT
FAIL TO OPERATE.
• DO NOT STAND ON THE UNIT.
• DO NOT ATTEMPT TO LIFT
HEAVY UNITS UN ASSISTED.
• DO CHECK THE PLUG ON THE
EQUIPMENT MATCHES THE
SUPPLY
• DO USE THIS UNIT ONLY FOR
THE PURPOSE FOR WHICH IT
WAS DESIGNED.
• DO ENSURE THE POWER
CORD AND SUPPLY IS
EARTHED CORRECTLY.
• DO CHECK THE VOLTAGE
SELECTION BEFORE
ATTAMPTING TO POWER UP
THE UNIT (DUAL VOLTAGE
UNITS ONLY).
• DO USE A RESIDUAL
CURRENT DEVICE “RCD”
WHERE POSSIBLE.
SERVICE
This machine should be serviced
by qualified Ebac personnel or
others having technical
competence in servicing
refrigeration equipment following
the instructions in the Ebac
Service Manual.
SPARES
Full spare parts listings and Ebac
Service Manuals are available
upon request by contacting Ebac
Industrial Products Ltd as listed
on the back of this manual.
OZONE FRIENDLY
The gas which is used inside the
hermitically sealed refrigeration
circuit is R407c, which is an HFC.
Under NO circumstances should
this gas be released into the
atmosphere. The unit should be
serviced by trained personnel
who will re-claim the removed
gas.
DISPOSAL OF THE UNIT
At the end of the machines
working life the refrigerant must
be disposed of in the correct
manner.
CONTACTING EIPL CUSTOMER SERVICES
If you have any further queries please contact the EIPL customer Services
Department on 01388 664400 and have the following information to hand:
• Part Number and Serial Number of the machine(located on the
rating plate at the front of the machine)
• Full name and address
• Where your machine was purchased