Manual

UNPACKING
Thank you for deciding to purchase
an EIPL Industrial dehumidifier. Like
the many tens of thousands of
people who have already bought an
EIPL dehumidifier we are confident
you will find it is the most effective
answer to the problem of
condensation and dampness related
problems.
IMPORTANT
Your industrial dehumidifier is
packed in a plastic wrapping –
please ensure that it is disposed of
safely where it will not be a danger to
children.
INTRODUCTION
Carefully remove the BD150
dehumidifier unit from it’s transit box
and visually check for any signs of
transit damage. If there is evidence
of damage DO NOT attempt to
operate the unit, call your supplier for
advice. Retain the packaging for
further use, or dispose of it
considerably.
This user manual tells you how to
use the BD150 dehumidifier. Please
read it thoroughly before operating
the dehumidifier. If you have any
questions about the unit please
contact our Customer Service
Department at the address shown at
the back manual.
Dehumidifiers remove moisture from
the air circulating through it.
Continuous operation reduces the
relative humidity of the air and this
helps prevent rust, rot, mould,
mildew and condensation within the
room, or other enclosed space where
the dehumidifier is used.
A dehumidifier consists of a motor,
compressor unit, a refrigerant
condenser, an air circulating fan, a
refrigerated surface, a means of
collecting and disposing of the
condensed moisture and a cabinet to
house these components.
GENERAL
EIPL Industrial dehumidifiers can be
stored and transported in the
horizontal or vertical position. To
operate, stand the unit upright,
connect power and it is ready for
operation.
When a generator is used to supply
the power, it is essential to check the
minimum kva required in the
technical section within this manual.
The generator must be started
before connection is made to the
dehumidifier.