User's Guide

13Chapter 1 InterWrite PRS – PRS Menus
Scan for Receivers This RF Menu option will look for and attach to any RF Receivers on the
system. Use this menu item only when an RF Receiver is attached to a
USB port on the computer. Or, when the RF Receiver has been moved
from one USB port to another after the PRS software has been started.
Configuring
Clickers
The basic process for configuring RF Clickers is the same, no matter which
Clicker Type configuration you choose.
1 Select the Clicker Type from the
drop-down menu.
2 When you choose one of the
Closed configurations, select a Class
in the RF Closed Classes window.
The Class ID you assigned to the
Closed Class will display.
3 Click on the Setup button to display
the Setup Instructions in the
Instructions window for the Clicker
Type you chose.
4 Turn on all the Clickers, as
instructed, and press the Quick
Jump number displayed in the
angle brackets (< >) on each
Clicker.
5 The “Configuration Class” name is displayed on each LCD. Press the
Enter/Send key to join each Clicker to the Configuration Class.
6 If the Clickers have been configured for Closed, each Clicker will display
the ID: field. Enter a unique ID for each Clicker. Press to save the ID.
The LCD display confirms the Clicker Type assignment. The Instructions
window on the Configure Clickers dialog will list the Join IDs assigned to
each of the Clickers you configured. You can Close the dialog, or select a
new Clicker Type and configure additional Clickers.
Normal is the default Clicker Type. Normal Clickers require
no configuration and can be used in any Open Class. The
option appears on the Clicker Type menu so that you can set
a Clicker that has been configured previously as a Loaner,
Master, Closed, Closed Loaner, or Closed Master Clicker
back to Normal.