User's Manual

4
Interwrite Mobi™ Getting Started
Charging the Interwrite Mobi and
Interactive Pen
Before you use your Interwrite Mobi and Interactive Pen for the first time,
they should be charged for about three hours. Whenever the Tablet battery
is low and needs to be recharged, the Tablet Battery Status Icon will flash
slowly.
1 Place the Interactive Pen in the Pen Tray.
2 Connect the Mini USB Cable to the Mini USB Jack at the top of the Tablet.
3 Plug the Cable into a USB port on your computer.
The Interwrite Mobi can be used while it is charging.
4 When the Tablet and Pen are charged and the Battery Status displays that
it is charged, unplug the Charger from the Interwrite Mobi.
5 Press the Power Button when the Interwrite Mobi is charged.
The buttons and status indicators are described in more detail in the Operat-
ing the Interwrite Mobi section.
Attaching the Tether to the Tablet and the
Pen
The tether has a loop at each end. One end has a metal ring attached to the
loop – that’s the Pen loop. The other end is the Tablet loop.
1 Thread the Tablet loop up through the hole above the Pen Tray. Thread
the Pen loop through the Tablet loop. Pull to tighten.
The rst thing you should do when you unpack your new
Interwrite Mobi and Interactive Pen is charge them.
The Pen can be charged only when it is placed in the Pen Tray in the
Tablet, and only when the Tablet is being charged. A Pen charge lasts
over 40 hours. You should always charge the Pen when the Tablet is
being charged.