User Manual

Welcome Page 21 of 54
file://C:\TEMP\~hhA856.htm 8/12/02
2a. Mount the tablet on a wall
CAUTION: To avoid damage to the controller, do not rest the SchoolBoard tablet on the controller housing (located on the rear
of the tablet near one corner). Do not scratch or damage the tablet's writing surface.
WARNING: Never nail or drill the SchoolBoard tablet. Doing so will damage the unit and void your warranty.
IMPORTANT: To avoid damage to the tablet or injury, two people should carry out this mounting procedure.
a. Attach the mounting bracket to the wall using hardware appropriate for the wall structure (this hardware is not included) as shown
below.
A Tablet
B Pen tray
C Phillips screw (4)
D Assembled view
A Note: This hardware not included. Hole spacing on
bracket matches 16" and 24" wall stud spacing.