User Manual

Welcome Page 10 of 54
file://C:\TEMP\~hhA856.htm 8/12/02
To disassemble the pen: Press the latch on the underside of the pen, then pull the pen apart. The two modules should
separate easily---excessive force is not required and should not be used. If the modules don't separate easily, press the latch
farther inward.
Next: You are ready to connect the system.
Which mode should you use?
The mode you use depends on what you want to do with the Meeting Suite system, as well as what hardware you have.
*Requires MeetingPad 300 and Bluetooth hub.
f. The LED should flash four times, indicating the pen is
working correctly.
MeetingBoard electronic pen, assembled
What can you do? Interactive Mode PC Whiteboard Mode Color Copyboard Mode
Write using electronic ink
ü
Write from a wireless remote
tablet
ü*
Write with dry erase markers in
electronic pens
ü ü
Annotate PC screens
ü
Write meeting notes on a
"blank page"
ü ü ü
Review, rearrange or delete
annotation images
ü ü
Distribute annotation images
electronically
ü ü
Print notes Optional Optional Required
**Ink jet printer must support HP PCL3, Epson Stylus Color P2 or Canon BJR Color protocol.
What do you need? Interactive Mode PC Whiteboard Mode Color Copyboard Mode
Windows computer Required Required ---
Video projector Required --- ---
Printer Optional Optional Ink jet printer required**
Main tablet MeetingBoard or
MeetingBoard LX
MeetingBoard or
MeetingBoard LX
MeetingBoard only
Remote tablet (optional) MeetingPad 100 or
MeetingPad 300
--- ---
1. Connect MeetingBoard
It is recommended that you connect using the PC's USB port. If the PC doesn't have a USB port, then connect using its serial
port.