User Manual

GB
17
machineʼs design and setup:
n Contact with the saw blade in the uncovered saw
zone.
n Reaching into the running saw blade (cut
injuries).
n Kick-back of workpieces and parts of
workpieces.
n Saw blade fracturing.
n Catapulting of faulty carbide tips from the saw
blade.
n Damage to hearing if essential ear-muffs are not
worn.
n Harmful emissions of wood dust when the
machine is used in closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
AC motor 230V ~ 50 Hz
Power 1800 W
Operating mode S1
Idling speed n
0
4,500 rpm
Carbide saw blade ø 250 x ø 30 x 2.8 mm
Number of teeth 36
Extractor socket Diameter 35 mm
Base area 490 x 318 mm
Weight 13.5 kg
For use as a bench-type saw:
Saw bench 416 x 352 mm
Cutting depth max. 40 mm
Maximum cross-section of the
workpiece 15.5 x 40 mm
Minimum size of the workpiece 30 x 10 x 100 mm
Cutting depth 0 - 40 mm
Parallel stop Can be pivoted from -45° to + 45°
For use as a crosscut saw:
Swiveling range -45° / 0° / +45°
Miter cut 0° to 45° to the left
Saw width at 90° 130 x 75 mm
Saw width at 45° 120 x 50 mm
Saw width at 2 x 45°
(double miter cut) 70 x 35 mm
Minimum size of the workpiece 50 x 10 x 100 mm
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L
pA
sound pressure level 93 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 106 dB(A)
K
WA
uncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 61029.
Vibration emission value a
h
= 2,02 m/s
2
K uncertainty = 1,5 m/s
2
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
n Only use appliances which are in perfect working
order.
n Service and clean the appliance regularly.
n Adapt your working style to suit the appliance.
n Do not overload the appliance.
n Have the appliance serviced whenever
necessary.
Anleitung_TH_MS_2513_T_SPK1__ 11.06.12 08:11 Seite 17