Operation Manual

GB
- 11 -
expected situations.
•
Always use the correct replacement rails
and saw chains recommended by the ma-
nufacturer. The use of incorrect replacement
rails or saw chains may result in breakage of
the chain and/or kickback.
•
Follow the manufacturer’s instructions
for sharpening and maintaining the saw
chain. The risk of kickback is increased if the
depth limiter is set too low.
More important information:
•
Use an earth-leakage circuit breaker with a
trip current of 30 mA or less.
•
Position the power cable such that it cannot
be caught by branches or the like during sa-
wing.
Residual risks
Even if you use this electric power tool in ac-
cordance to instructions, certain residual risks
cannot be eliminated. The following hazards may
arise in connection with the equipment’s const-
ruction and layout:
•
Cut injuries if no safety clothing is used.
•
Lung damage if no suitable protective dust
mask is applied.
•
Damage to hearing if no suitable ear protec-
tion is applied.
•
Health damage caused by hand-arm vibra-
tions if the equipment is used over a longer
period or is not properly guided and maintai-
ned.
Warning! The electric power tool generates an
electromagnetic fi eld during operation. Under cer-
tain circumstances this fi eld may actively or passi-
vely impede medical implants. To reduce the risk
of serious or fatal injuries, we recommend per-
sons with medical implants to consult their doctor
and the manufacturer of the medical implant prior
to using the equipment.
Do not lose this safety information.
SiHi_GC_EC_750_T_SPK7.indb 11SiHi_GC_EC_750_T_SPK7.indb 11 16.09.14 16:2216.09.14 16:22