Use and Care Manual

EN
- 11 -
10. Troubleshooting
If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Problem Possible cause Remedy
Unusual noises - Loose screws/parts?
- Foreign bodies in the blade?
- Damaged blade?
- Wrongly adjusted bladed?
- Tighten the screws
- Remove the foreign bodies
- Have the blade replaced
- Set the counter blade (see 7.2.1)
Unsatisfactory
cutting results
- Wrongly adjusted bladed?
- Blunt blade?
- Set the counter blade (see 7.2.1)
- Have the blade sharpened or replaced
Anl_GE_HM_38_S_F_SPK7_USA.indb 11Anl_GE_HM_38_S_F_SPK7_USA.indb 11 17.12.2018 17:18:4617.12.2018 17:18:46