Instruction Manual

34
7. Complete the installation of the appliance and fix the oven with 4 screws (fig. 2, right
side).
2.4 Electrical connection
Instructions for the installer (qualified professional)
The cooker is manufactured to work with three-phase alternating current
(400V3N~50Hz). Remember that the connection wire should match the connection
type and the power rating of the cooker. The connection cable must be secured in a
strain-relief clamp. The ground wire must be connected to the marked clamp of the
terminal. The electric supply of the appliance must be equipped with an emergency
switch with a distance between the contacts of at least 3 mm which disconnects the
entire appliance from the mains in a case of emergency. Read the information on the
rating label and the connection diagram before connecting the appliance to the
mains.
When the socket is not accessible for the user or a fixed electrical connection of
the appliance is required, an all-pole disconnecting device must be incorporated
during installation. Disconnecting devices are switches with a contact opening
distance of at least 3 mm. These include LS-switches, fuses and protectors (EN
30335).