Instruction Manual

32
2.2 Installation/hob
Make an installation-opening with the dimensions given on the drawing below).
❖ Fix the supplied sealing tape on the corresponding place of the hob.
❖ Check the seal for perfect fit and overall cover. Insert the electric hob in the opening
and align it correctly.
❖ Using a standard screwdriver, tighten the tension clamps evenly starting at the centre
and moving diagonal, until the built-in rim is tight on the worktop.
❖ The hob must be vented properly. Air inlet and air outlet must not be blocked.
Min. safety distance between hob and a cupboard
above = 76 cm.
A: Air inlet