1. reduction Scapegoat TH / STCI000WIFI TH Is an Integrated plug-and-play temperature and humbly controller it has temperature and humidity integrated probe and is per-connected to two output sockets to control temperature and humidity simultaneously. The large LUD screen Intuitively displays temperature, humidity, and other parameters, With the three key design, kt enables quick parameter setting, such as alarm limit, calibration, protection time, unit switching, etc.
2.2 Parameter Table HWE {TER TS TH THT Ta TAL TEA BL HEH HE HD HPT FH HAL HEA £67 *HEB: BEE: Ed Flag SIN | Leda Function Seethe ran Ba tali val Temperature 1 | TCH | consolidating CH ¢ mods selection Temps ee n vain Owe B® i 0.215 2 a | top | Temperature 1 differential 1~30°F 3 3 Teleprinter .
23.3 Button Operation 18H ashlar | oe fling) FE ops | View parterre Rev Vow | eases 1 & rags and Contentions hold Erases fern or 3 fy Pray ang Belted Sheri eels Lien smite mode sands Preys | Parliaments | Next Decreases : By value pa press and Contuses fol] decries [| Armand Ari 4 2 mien | webs STOOD (5) ewe WaT 5 pant | 5 [Ey bee | Een ify See Table 3 %, Operation important: improper use of the product may cause Injury or product carnage. Please read, understand and follow the operating steps below.
2.9 Sensor installation Plug the sensor fully Anti the headphone Jack from the button of the main frontier, Fully Lug In Fig. 4 3.2 Power-on Please Insert the power plug Into the power socket to prows on the controller fl thin the range of 100-240VAC). Tha screen will light up and display the tempera tuns, humidity, and other readings.
2.3 Parameter Setting Press and hal button for 3 seconds to enter the parameter setting mode, the buzzer will beep, and the LCD will display ©, Leon, Ir the ren setting, press [; button and the Te parameter light will be on or flashes.
Enter jpg ' _— Tee TT Temperature mode selection Temperature set val Temperature unit " AE a -oi 30. .
4. Function Description #4 Temperatures Setting TON TS, 70 ing mode (TUR =} ‘When Trv (temperature-present value) is higher than TS + TD (temperature-set value + temperature differential), @ will appear, work will be turned on, and cooling will begin; ‘When Tev {temperature present wale} Is loser han TS temperature sat value, 8 will disappear, work will be muted off, and cooling will stop. For example: TS = 15°C, TD = 5°C, as shown In Fig 8.
4.
Humidifying Mods (10H « 1) ‘When Hev {humidity-present value) is [wore than HS-HD (humidity set value torridity differential), 8 will appear, work? will be muted on, and Humidifying will begin; 18 WORK On When Hov {nudity present value) is %RH [] work of higher than HS (humidity set value), § pe. ‘will appear, work will be ume off, and humidifying will stop. 40 For strapless: HS = SO%RH, HD = 10%RH, as shown in Fig 1. Fig. 11 4.
£98 Continues Operating Thur COT During humidity control, when C0T=0 and output conditions are met, WORK socket will work in on-off-on-off.. mode, COT is tee on as well as time off eg, IF COT=10, the LICORICE output socket will tum on For 10 minutes and off for “10 inures, then repeat. Wuhan COT = 0 ard output conditions are met, WORK autistic socket will not free affected by LOT. 4.7% Back light Tami the screen display Tums. When Bl=0 indicates display is always on. 5.
& Alarm n the following circumstances during operation, the buzzer will give a “hi-bi-Biii® anal, and st the same tine, the alarm symbol fe on the screen will appear. Press any button to mute the alarm.
8.1 Before vou begin, please make sure: The device supports 246 WI-Fi. {5G WI-Fi is nat compatible.) “The device is in a good and stable WI-Fi network environment. Search Fichte In the App Store, download and Install the app. $.2 Contact the device te Blithe app 1. Fiona the OR code label on the device {#t shows QR code and 20 numbers) 2. Peeper on The device. 3. Log In your Attache account {Register an Chattel account) 4, Click the sign + on top right and add device. combatant Fig. 14 5.
6.4 window will pop up “The device 1 scanned is 3 WEF device. Would vou Bike bs set WARSHIP Lick OK. sn won Fig. 16 7 Enter WI-F| password, click OK, and Walt until the operation finishes, The whole process takes about 10 rear ery ‘seconds. It exits configuration Interface m— after the network Is connected fu shy successfully. SE The rate terrace displays the device is online, meanwhile, the sign shows ar top of the screen. Fig.
