Owner`s manual

74
10.How to Use the PJ Controller
How to Operate
This operation requires that the projector is set correctly on the network and the image in the
computer is properly displayed from the projector with "NetworkModule Client" or
"NetworkModule Moderator" applications on the computer.
Activate the PJ Controller.
1. Activate the "NetworkModule Client" or " NetworkModule Moderator".
2. Select the Advanced settings screen.
3. Select a projector from the Network Projector List. (Selected Projector name will be blue.)
You can select and operate one projector only. Multiple projectors cannot be operated. If you
select and execute multiple projectors, another function screen (Multi Control Screen. See
p89-90.) will appear.
4. Click the PJ Controller button then the PJ Controller screen will appear.
Left side of the screen is the Operation Item Selection Screen.
Right side of the screen is the Screen for Adjustment.
First, Initial Setting Menu will appear. Before using PJ Controller, set the items on this screen.
5. To terminate PJ Controller, select "Exit" from "File" in the tool menu.
✳ The projector cannot be connected to via the networks while using the viewer.
PJ Controller