Owner`s manual

71
9. How to Use Network Viewer
4. Select, execute, and stop the mode of image replay.
Move the red arrow pointer to the item you wish to choose.
Using Point buttons and SELECT button of the projector, configure or execute each item.
Auto ........................Play images and stop playing according to following configurations.
Second ....................Set timing to switch images in Auto play mode. (3-240 sec.)
........................Set "On" to make the projector keep playing images repeatedly.
Times ....................Specify the number of repeating times of auto play. (Maximum 255
times)
Manual ....................Switch images manually.
Press the Point e button on the projector (or the remote control) to
show the next image and the Point d button to show the previous
image.
Connect to the FTP server
......................Move the red arrow pointer to "Connect" and press SELECT button on
the projector (or the remote control) to connect the projector to the FTP
server. Then the projector starts playing the images in the FTP server.
Disconnect from the FTP server
......................Move the red arrow pointer to "Disconnect" and press SELECT button
on the projector (or the remote control) to disconnect the projector from
the FTP server.
∞
English