Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...

7
Operating Environment and Configuration
Network Specifications of the Projector
LAN Terminal
Data communication speed
100Base-TX(100Mbps)/10Base-T(10Mbps)
Protocol TCP/IP
USB Wireless LAN Adapter (Optionally available. Model : WL-30)
Interface
Correspond to IEEE8021b/g, USB 2.0 / 1.1
Communication Mode
AdHoc,
Infrastructure
Data Transfer Speed
1/2/5.5/11Mbps(IEEE802.11b)
6/9/12/18/24/36/48/54Mbps(IEEE802.11g)
When using AdHoc mode, only IEEE802.11b is
usable.
Wireless Frequency (Channel)
2412MHz-2462MHz (CH1-CH11)
Modulation Form
IEEE802.11g OFDM
54/4Mbps 64QAM, 36/24Mbps 16QAM, 18/12Mbps
QRSK, 9/6Mbps BPSK
IEEE802.11b DSSS1
11/5Mbps CCK, 2Mbps DQPSK, 1Mbps DBPSK
Protocol TCP/IP
WEP 64 Bit/WEP 128Bit/WEP 152Bit,SSID,ESSID, LEAP
Service area
about 30m(without disturbance)
Differs according to the operating environment.
Compliance
Countries and Standards
Operating Voltage DC 5V
Environmental conditions
Operating temperature : 5-35˚C
Storage temperature / Humidity :10-60˚C/5-95%
JAPAN: VCCI ClassB,TELEC(Wireless)
USA: FCC Part15 Subpart C (Wireless)
FCC Part15 Subpart C, Class B
Europe: R&TTE, EMC, LVD
Canada: IC RSS-210(Wireless), IC ICES-003 ClassB
Security
English