Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...
43
6. Configurations with Browser
* Not shown at Wired LAN setting.
Parameter Description
Firmware Version ............................Show the firmware version of the projector.
Boot ROM Version ..........................Show the boot ROM version of the projector.
Hardware Address ..........................Show the MAC address.
IP Address ......................................Show the IP address currently set on the projector. If DHCP is set, the
IP address assigned from the DHCP server is displayed.
Wireless Mode* ..............................Show the Communication standard 802.11b or 802.11b.g
Wireless Link Status*......................Show the Wireless communication mode and its status of the projector.
WEP Security* ................................Show the WEP (Encryption) setting status of the projector.
However, the WEP key is not shown.
Current SSID* ................................Show SSID set on the projector.
Current Channel*......................Show the channel, through which the projector is currently
communicating.
Data Transfer Rate* ........................Show the current Wireless communication speed of the projector. The
communication speed is automatically changed by the environment at
that time (11/5.5/2/1/54/48/36/24/18/12/9/6 Mbps). The communication
speed cannot be fixed.
Current User/PC..............................Show the IP address of the computer, which is currently transferring
images to the projector
System Time ..................................Show the elapsed time since the power is turned on.
The time can be reset by selecting “Reset” from the browser
configuration screen, or by disconnecting power from the projector and
connecting back on.
Projector ..........................................Show the name of projector. (Can be changed)
Refresh button ................................Refresh the displayed data.
Parameters and descriptions of Information
English