Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...
40
6. Configurations with Browser
To operate by the browser, you need to prepare and configure the environment.
Check the environment of the browser and configure to operate the projector.
Browser is required to support the following version.
Microsoft : Internet Explorer Ver.4.0 or later
Netscape Communications : Netscape Communicator Ver6.0 or later
Browser Configuration
Configure the operating environment of the browser. Configuration has to be accurate for
proper operation.
Using Proxy Server
Internet Explorer
Start up Internet Explorer. Select "Tools" ➔ "Internet Options". Select the "Connections" tab and
click the "LAN Settings" button in the "Local Area Network (LAN) Settings" field. Click the
"Advanced" button in the "Proxy Server" field. Enter the IP address set on the projector in the
"Do not use proxy server for addresses beginning with" field.
Netscape Navigator
Start up Netscape Navigator. Select "Edit" ➔ "Setup" ➔ "Category". Select "Details" and "Proxy",
and check on "Set proxy manually.". Click the "Display" button and enter the IP address of the
projector in the "Proxy server is not used at address starting from the following IP address" field.
Not using Proxy Server
Internet Explorer
Start up Internet Explorer. Select "Tools" ➔ "Internet Options". Select the "Connection" tab and
click the "LAN Setup" button in the "Local Area Network (LAN) Setup" field. Check off "Proxy
server is used at local address" of the "Proxy Server" field.
Netscape Navigator
Start up Netscape Navigator. Select "Edit" ➔ "Setup" ➔ "Category". Select "Details" and "Proxy",
and check "Connect Internet directly".
Browser Environment
Introduction