Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...
Chapter
5. Wireless LAN Configurations
5
This chapter describes the preparation for Wireless
LAN setting with projectors and how to set the
LAN environment.
To operate via Wireless LAN, attach the optionally
available USB Wireless LAN Adapter (Model : WL-
30) to the projector.
The setting procedures and configurations differ
depending on the LAN installation location.
Consult your system administrator for installation
and set the LAN appropriately.
To operate via Wireless LAN, your computer has to
be equipped with a Wireless LAN card adapter
which supports IEEE 802.11b/g.
If connecting in Infrastructure mode with an access
point, the access point is required to support IEEE
802.11b/g.
Caution : Do not use a mobile phones or PHS near
(within 20cm / 8inch) the projector. It
may cause malfunction.
33
English