Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...
31
4. Wired LAN Configurations
Factory Default Setting of the Wired LAN
SELECTED LAN
Parameter
LAN1 LAN2 LAN3
IP ADDRESS
169.254.100.100 192.168.100.100 192.168.100.100
SUBNET MASK
255.255.0.0 255.255.255.0 255.255.255.0
GATEWAY
ADDRESS
255.255.255.255
255.255.255.255
255.255.255.255
DNS ADDRESS
255.255.255.255 255.255.255.255 255.255.255.255
IP CONFIGURATION
MANUAL DHCP MANUAL
INTERRUPT
CONNECTION
PERMISSION
ENABLE ENABLE ENABLE
IP CONFIGURATION
with ARP+PING
ENABLE
ENABLE ENABLE
DNS DOMAIN
_ _ _
SYSTEM
PASSWORD
BLANK BLANK BLANK
USER PIN CODE
0000(NONE) 0000(NONE)
0000(NONE)
These settings can be made only by the browser.
Refer to "6. Configurations with Browser". (p39-54)
English