Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...
30
4. Wired LAN Configurations
The User PIN code is to restrict the access from the networks to the projector.
After setting the User PIN code, you need to enter it to operate the projector via the networks.
1. Select User PIN code, and press the SELECT button.
The User PIN code screen will appear.
2. Set the User PIN code.
Set the figures with the Point ed buttons and move to the next items with the Point 7
8buttons. Select "Set" and press the SELECT button to set. To cancel the preset User PIN
code, select "Cancel". When you do not want to set the User PIN code, set "0000".
It is recommended to set the User PIN code if you use the projector via the networks. You can
also change the User PIN code. See "6. Configurations with Browser" ➔ "Advanced Settings" ➔
"User PIN code". (p50)
NetworkModule Information
MAIN PROGRAM : xxxxx
BOOT PROGRAM : xxxxx
MAC ADDRESS : 08007B650056
IP ADDRESS : 172.21.95.202
SUBNET MASK : 255.255.255.0
GATEWAY ADDRESS : 172.21.95.1
IP CONFIGURATION : Manual
ARP + PING : Enable
CONNECTED PC : (None)
Wired Factory Default
Select Wired information from the projector menu and press the SELECT button to show LAN
setting environment of the currently selected projector. (The description below is an example
and different from what will be shown.)
Return all the Wired LAN settings to the factory default settings which are shown on the next
page.
Wired Factory Default
Wired information
User PIN code
(See the menu above.)
(See the menu above.)
Wired Information
User PIN Code
User PIN code screen