Owner`s manual
Table Of Contents
- Compliance
- Safety Instructions
- Table of Contents
- Operating Environment and Co...
- Required Operating Environme...
- Network Specifications of th...
- 1. About LAN Functions
- LAN Functions and the Features
- Image Projecting System via LAN
- Flow of Image Transfer
- An Example of the Connection
- LAN Connection Modes
- 2. Setup Procedures
- Installing the Software
- 3. Names and Functions of t
- Operation Screen.
- Network Connection Standby D...
- NetworkModule Client
- NetworkModule Moderator
- 4. Wired LAN Configurations
- Connecting to the LAN Line
- Network Environment Settings
- Setting Procedure
- Confirming the Operation
- User PIN C
- Wired Informati
- Wired Factory Default
- Factory Default Setting of t...
- 5. Wireless LAN Configurations
- Attaching the USB Wireless L...
- Setting the Network Environment
- Setting Procedures
- Easy Setting
- Setting Procedures
- User PIN C
- Wireless Informat
- Wireless Factory Default
- Wireless LAN Factory Default...
- 6. Configurations with Browser
- Introduction
- Browser Environment
- Browser Configuration
- Starting up the Browser
- Information
- Quick Setup
- Advanced Settings
- TCP / IP
- Wireless Setting
- Admin Password
- User PIN code
- Moderator Login Password
- Miscellaneous
- Change Configuration Set
- Restart
- 7. Project the Image via the...
- 8. Use the Moderator Function
- Moderator Function
- Preparation for Using the Mo...
- Preparation Procedure for Us...
- Setting the Moderator Function
- Registration of the Moderator
- Clients (Participants)
- Unregister from Moderator St...
- How to Use the Moderator Fun...
- Project the Client's Images
- Stop Projecting the Client's...
- Easy Settings for Moderator ...
- 9. How to Use Network Viewer
- The Mechanism of Network Vie...
- Operation
- Functional Conditions of FTP...
- Projecting the Image
- 10. How to Use the PJ Contro...
- How to Operate
- Initial Settings
- E-mail Setting
- Power & Status
- Control
- Multi Control
- 11. Appendix
- Troubleshooting
- Terminology
- Setting up the IP address wi...
17
2. Setup Procedures
Installing the Software
Three pieces of software is recorded in the supplied CD-ROM.
1. Insert the CD-ROM into the drive.
The software will be activated automatically and "Software License" screen will be displayed.
Read the license carefully and if you agree, check "Agree" then click "OK".
When the screen is not displayed automatically, open "CD-ROM Drive" in "My computer" of
your computer to activate "AutoRun. exe". The software can be displayed both in Japanese
and English. When the English version does not appear, open the English folder in the CD-
ROM and double-click "AutoRun. exe" in it.
2. Main menu will be displayed on the screen.
Three software names will be shown on the left side of the screen.
Refer to the instructions below and select the most suitable software for you.
■ When projecting via a selected computer which is connected to the LAN.
Install "NetworkModule Client".
a Click (Select) "NetworkModule Client" on the left side of the screen.
s Click "Install NetworkModule Client" on the right side of the screen then move to the step f.
✳ By clicking the "Activate NetworkModule Client", you can activate the software directly from
the CD-ROM without installing the software into the computer.
English