International WL-10 USB Memory Owner's Manual
Table Of Contents
- 2-26_En.pdf
- Introduction
- Index
- 1. Preparation
- Installing the USB Memory
- 2. Memory Viewer
- How to Use the Memory Viewer...
- Edit Image Data for Display
- Rotation
- Delete
- Reorder
- Auto Play Setting
- 3. Slide Converter
- About Slide Converter
- Installing Slide Converter
- Operating Slide Converter
- Import Image Files
- Edit Image files
- Save / Delete Data
- Other Functions
22
- Set the image switch timing
Select an image then [Option] -> [Image Switch Timing Settings]
Set the timing of switching images.
Parameter Description
Manual Advance..............Switch images when pressing the Point ed buttons on the
remote control or the top control of the projector.
Automatic Timer ................Switch images at the interval time set on Timer Value*
Timer Value........................Set an interval time for Automatic Timer.
- Execute a slide show
[Image] -> [Slide Show]
Select "Slide Show" from Image menu to simulate a slide show on your computer
display.
The slide show will be executed in order of the numbers shown at the left top of each
image.
Switch images by using Page ed keys on your PC keyboard if no setting on the Image
Switch Timing. To exit the slide show, press the Esc key.
Note1: At the factory, "Manual Advance" is selected.
Note2: When projecting images automatically with the projector, interval time between images set on
"Image Switch Timing Settings" is prior to that on "Auto Play". (p13)
3. Slide Converter