MULTIMEDIA PROJECTOR MODEL LC-XT5 ✽ Projection lens is optional.
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Functionally Rich ◆ Operation menu is available in 12 languages; English, German, French, It alian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese (p.47).
Table of Contents Features and Design . . . . . . . . . . . . . . . . Table of Contents . . . . . . . . . . . . . . . . . . . To The Owner . . . . . . . . . . . . . . . . . . . . . . Safety Instructions . . . . . . . . . . . . . . . . . 2 3 4 5 Air Circulation 6 Installing the P rojector in Proper Directions 7 Moving the Projector 8 Compliance . . . . . . . . . . . . . . . . . . . . . . .
To The Owner Before installing and operating the projector, read this manual thoroughly. The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.
Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This projector should be operated only from the type of power source indicated on the marking label.
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.
Safety Instructions IMPORTANT! Filter Maintenance!! The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector. In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector or in the filter.
Safety Instructions Moving the Projector For safety, be sure to hold Carrying Handles on both sides by 2 or more people when moving a projector. Moving it improperly may result in damage of cabinet or person's injury. Replace lens cap and retract feet to prevent damage to lens and cabinet. 1 Pull up lock buttons on each side of carrying handles to release locks. 2 Pull carrying handles out fully until the handles click. Move a projector by holding two handles by 2 or more people.
Compliance Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Part Names and Functions Front i q w e r y u t q w e r Infrared Remote Receiver (Front) Lens Cap (Option) Projection Lens (Option) Level and Pitch Adjust Handle t y u i o Carrying Handle Side Control Main On/Off Switch Power Cord Connector Indicator (Rear) o CAUTION Back !1 Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
Part Names and Functions Input / Output Terminals and Jacks G B R VIDEO/Y Pb/Cb Pr/Cr USB H/HV S-VIDEO ▼ V L INPUT 4 R/C JACK ANALOG DIGITAL (DVI-D) INPUT 1 SERIAL PORT IN SERIAL PORT OUT y t RESET e r ✽ INPUT 2 w INPUT 3 q u i q SERIAL PORT IN TERMINAL If you control a projector by computer, you must connect a cable (not supplied) from your computer to this terminal. t DVI INPUT TERMINAL w SERIAL PORT OUT TERMINAL This terminal outputs signal from SERIAL PORT IN.
Part Names and Functions Side Control and Indicators FRONT INDICATORS REAR INDICATORS SIDE CONTROLS Side Controls ZOOM FOCUS ON/STAND-BY q t y u LENS SHIFT MENU INPUT 1/2 w i INPUT 3/4 SELECT e o !0 !1 r AUTO PC ADJ. q ZOOM buttons Zoom in and out the images. (p.27) w MENU button Open or close the On-Screen MENU. (p.25, 26) e POINT button - Select an item or adjust the value in the OnScreen MENU. - Pan the image in DIGITAL ZOOM + mode. (p.39) r AUTO PC ADJ.
Part Names and Functions Indicators Front Indicators q w LAMP READY WARN IN LAMP e READY WARNING TEMP. r LAMP REPLACE TEMP. G q LAMP Indicator LAM REPLAP This indicator is dim when a projector is turned on. CE And bright when a projector is in stand-by mode. (pp.68-69) w READY indicator This indicator lights green when a projector is ready to be turned on. And it flashes green in Power Management mode. (pp.51, 68-69) e WARNING TEMP.
Part Names and Functions Remote Control e w q ON/STAND-BY button Turn the projector on or off. (p.23) q w AUTO PC button Automatically adjust the computer image to its optimum setting (pp.28, 34). r !1 t !2 y !3 !4 u !5 !6 i r MENU button Open or close the On-Screen MENU. (pp.25-26) t Point ed 7 8 buttons – Select an item or adjust the value in The ON-SCREEN MENU. –Pan the image in DIGITAL ZOOM +/– mode. (p.39) y LENS SHIFT button Select the LENS SHIFT function. (p.
Part Names and Functions Remote Control Battery Installation 1 Open the battery compartment lid. 2 Install new batteries into the compartment. Pull up the lid and remove it. 3 Replace the compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To insure safe operation, please observe the following precautions : ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets.
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 50.
Installation Lens Installation Before setting up a projector, install Projection Lens on a Projector. 1. Before installation, check where a projector is used and prepare a suitable lens. For the specifications of Projection Lens, refer to the manual attached separately or contact sales dealer where you purchased the projector. 2. For installation, refer to the installation manual accompanying a Projector. When setting a projector after lens installation, be sure to replace a Lens Cap to protect a surface.
Installation Lens Shift Adjustment Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen.(See page 27) The display position can be shifted upward up to 50% elevation of the display. The display position can be shifted downward up to 50% low level of the display. When the lens is shifted to top. When the lens is shifted to bottom.
Installation Terminals of Projector This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, contact sales dealer where you purchased a projector.
Installation Connecting to Computer Cables used for connection • VGA Cable (D-sub 15 pin) * • DVI Cable • BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.
Installation Connecting to Video Equipment Cables used for connection • Video Cable (BNC x 3, BNC x 1) • SCART-VGA Cable • DVI Cable • S-Video Cable ( Cables are not supplied with the projector.) Component video output equipment. Video Source (example) Composite Video Output Component Video Output Digital Output (HDCP compatible) Pb/Cb Pr/Cr Y (such as DVD player or high-definition TV source.
Installation Connecting the AC Power Cord This projector uses nominal input voltages of 200–240 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning on the projector.
Basic Operation Turning On the Projector 1 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector’s AC power cord into an AC outlet and turn the MAIN ON/OFF Switch to ON. The LAMP indicator lights red and the READY indicator lights green. 3 Press the ON/STAND-BY button on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate.
Basic Operation Turning Off the Projector 1 Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen. 2 Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate for 90 seconds. You cannot turn on the projector during this cooling down period.
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control to display the On-Screen Menu. 2 Use the Point 7 8 buttons to select a Menu icon. Use the Point ed buttons to select an item in the selected menu. 3 Press the SELECT button to show the item data.
Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 65-67. For Computer Source q w e r t y u i o q Guide Window y Image Adjust Menu Show the selected Menu of the On-Screen Menu. Used to adjust the computer image. [Contrast/ Brightness/ Color management/Auto picture control/Color temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/ Gamma/Reset/ Store/Quit] (pp. 44–46). w Input Menu Used to select an input source Computer or Video (pp. 3032).
Basic Operation Operating with Projector Control Zoom Adjustment Display “Zoom” on the screen. Use the ZOOM ed buttons to zoom in and out the image. Side Control ZOOM ZOOM buttons FOCUS ON/STAND-BY FOCUS buttons Focus Adjustment Display “Focus” on the screen. Use the FOCUS ed buttons to adjust focus of the image. Lens Shift Adjustment Display “Lens shift” on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion.
Basic Operation Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 34 for details. LENS SHIFT button See page 27 for details.
Basic Operation Remote Control NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHOW button IMAGE ADJ. button “No show” disappears after 4 seconds. KEYSTONE button IMAGE ADJ. button Press the IMAGE ADJ. button on the remote control to adjust a image level of the screen. For more detail, see pp.44-46. P-TIMER button IMAGE SEL. button IMAGE SEL.
Input Selection Input ZOOM FOCUS Side Control Side Control button operation ON/STAND-BY INPUT 1/2 button LENS SHIFT MENU INPUT 1/2 INPUT 1/2 button SELECT INPUT 3/4 button INPUT 1 INPUT 3 INPUT 2 INPUT 4 INPUT 3/4 INPUT 3/4 button Side Control Operation IMAGE SEL. AUTO PC ADJ. Press the INPUT 1/2 or INPUT 3/4 button on the side control. It switches to INPUT 1 and INPUT 2, or INPUT 3 and INPUT 4 as you press the INPUT button.
Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 Board 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to the desired input and then press the SELECT button. The Source Select Menu appears. 3 Use the Point ed buttons to select the desired source and then press the SELECT button.
Input Selection Video Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 Board When connecting to video equipment, select the type of Video source in the Source Select Menu. INPUT MENU Input Menu icon RGB (Scart) When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart). Move the pointer (red arrow) to Input 1 and press the SELECT button.
Computer Input Computer System Selection Automatic Multi-Scan System This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 70–71). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.
Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Direct Operation Remote Control The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control or the AUTO PC ADJ. button on the side control. AUTO PC button ZOOM FOCUS ON/STAND-BY Side Control LENS SHIFT MENU INPUT 3/4 SELECT AUTO PC ADJ. INPUT 1/2 IMAGE SEL.
Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. To clear the adjusted data. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Store To store the adjusted data, select Store and then press the SELECT button.
Computer Input Image Level Selection Direct Operation ZOOM FOCUS ON/STAND-BY Side Control Press the IMAGE SEL. button on the remote control or on the side control to select the desired image level. LENS SHIFT MENU INPUT 3/4 SELECT Standard AUTO PC ADJ. INPUT 1/2 IMAGE SEL. IMAGE SEL. button Real Image1 Remote Control • • • Image 10 IMAGE SEL. button Menu Operation 1 Press the MENU button to display the On-Screen Menu.
Computer Input Screen Size Adjustment Select the desired screen size that conforms to the input signal source. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. SCREEN MENU Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button.
Computer Input Keystone SCREEN MENU This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store . . . Keep the keystone correction even when the AC power cord is unplugged. Reset . . . Release the keystone correction when the AC power cord is unplugged. To correct keystone distortion, press the Select button. The Keystone dialog box appears. Use the Point ed7 8 buttons to correct keystone distortion.
Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video Jack or S-Video Jack Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. PAL/SECAM/NTSC/NTSC4.
Video Input Image Level Selection Direct Operation ZOOM FOCUS ON/STAND-BY Side Control Press the IMAGE SEL. button on the remote control or on the side control to select the desired image level. LENS SHIFT MENU INPUT 3/4 SELECT Standard AUTO PC ADJ. INPUT 1/2 IMAGE SEL. IMAGE SEL. button Cinema Image1 Remote Control • • • Image 10 IMAGE SEL. button Menu Operation 1 Press the MENU button to display the On-Screen Menu.
Video Input Screen Size Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. SCREEN MENU Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button. Normal Provide the image at the normal video aspect ratio of 4:3.
Video Input Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store . . . Keep the keystone correction even when the AC power cord is unplugged. Reset . . . Release the keystone correction when the AC power cord is unplugged. SCREEN MENU Move the red frame pointer to a function and press the SELECT button. To correct keystone distortion, press the Select button.
Picture Image Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. IMAGE ADJUST MENU Image Adjust Menu icon Move the red frame pointer to the desired item and then press SELECT button.
Picture Image COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. MENU Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored.
Picture Image White balance (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone; press the Point 8 button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone of the black level of an image; press the Point 8 button to deepen red/ green/blue tone of the black level of an image (from 0 to 63).
Setting Setting This projector has a Setting menu that allows you to set up other various functions. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The Setting dialog box appears. SETTING MENU (Language) Setting Menu icon Set the red frame pointer to the item and press the SELECT button.
Setting Logo Logo This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. ✔Note: • When “On” is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected. Logo select This function decides on the starting-up display from among the following options. User . . . . Show the image you captured. Default . . Show the factory-set logo. Off . . . . . Show the countdown display only.
Setting Logo PIN code lock Logo PIN Code Lock This function prevents an unauthorized person from changing the screen logo. Off . . . . . The screen logo can be changed freely from the Logo Menu. On . . . . . The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.
Setting Lamp mode This Projector is equipped with 4 Projection Lamps and the number of using lamps can be switched to 4 lamps or 2 lamps. Using 2 lamps maintains the life of Projection Lamps. To change over Lamp Mode Press the Point ed buttons to move the red frame pointer to “Lamp mode”. Set "4 lamps mode" or "2 lamps mode" by pressing the Point 7 8 buttons. When the Lamp Mode is switched from "4 lamps mode" to "2 lamps mode", the image becomes a little darker.
Setting RC sensor Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details. Both.......... Activate both the front and back receiver. Front......... Activate only the front receiver. Back.......... Activate only the back receiver.
Setting Security Security Key lock This function locks the side control and remote control buttons to prevent operation by unauthorized persons. . . . . . Unlocked. . . . . . Lock the side control buttons. To unlock, use the remote control. . . . . . Lock the remote control buttons. To unlock, use the side control. If the side control accidentally becomes locked and you do not have the remote control nearby and unable to operate the projector, contact the service station.
Setting Enter a PIN code Enter a PIN code Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a fourdigit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can change the PIN code lock setting .
Setting Lamp counter This function is used to reset the lamp counter. When the lamp life reaches a recommended lamp replacement time, the time shown in the dialog box turns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. This icon appears on the screen when the end of lamp life is approaching. ✔Note: • This icon also appears at turning on and selecting input source. When replacing the projection lamp, reset the lamp counter.
Maintenance and Care Air Filter Care and Cleaning Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter immediately. Clean the filter by following the steps below.
Maintenance and Care Lamp Management This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of all lamps and shows the status on screen or on the LAMP REPLACE indicator. This function also automatically controls the Lamp Mode when any of lamps is out for the end of life or malfunctions.
Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. Indicators WARNING: TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER.
Maintenance and Care Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon 2 Use the Point ed buttons to move the red frame pointer to Lamp counter and then press the SELECT button. A dialog box appears.
Maintenance and Care LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.
Maintenance and Care Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning.
Maintenance and Care Warning Indicators The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the READY indicator to take proper maintenance. The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector.
Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21. 2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected. 3. Make sure that all power is switched on. 4. If the projector still does not produce an image, restart your computer. 5.
Appendix Picture is not bright enough. – Check if “Contrast” or “Brightness” are adjusted properly. (See page 44) – Check if “Image level” is selected properly. (See pages 37, 41) – Check the Lamp control function. ( See “SETTING” section on page 50) – Check the Lamp replace indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 57) – The image is darker when 2 lamp mode is selected, compared with 4 lamp mode.
Appendix WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L.
Appendix Menu Tree Computer Input/Video Input Input Input 1 Go to System (1) RGB (PC analog) RGB (Scart) RGB (PC digital) Go to System (1) RGB (AV HDCP) Input 2 RGB Go to System (1) Y, Pb/Cb,Pr/Cr Go to System (3) Video Go to System (2) S-video Go to System (2) Network Information Information Image Adjust Image Adjust Input H-sync freq. V-sync freq.
Appendix Computer Input System (1) Image Select Mode 1 Standard Mode 2 Real SVGA 1 Image 1 SVGA 2 SVGA 3 Image 10 ✽ System displayed in the System Menu varies depending on the input signal. PC Adjust Screen Auto PC adj. Fine sync.
Appendix Computer Input/Video Input Setting 12 languages provided. Language Quit Menu Position/Simple Menu Display On/Countdown Off/Off Background Logo Blue/User/Black Logo select User/Default/Off Capture Yes/No Logo PIN code lock On/Off Logo PIN code change Quit Quit Lamp mode 4-Lamp mode/ 2-Lamp mode Lamp control Auto/Normal/Eco Fan control Normal/Max Remote Control Code 1 Quit Code 8 RC sensor Quit Both/Front/Back Power management Off Ready Shut down 1–30 Min.
Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. Indicators LAMP red READY green Projector Condition WARNING LAMP TEMP. REPLACE red orange The projector is off. (The main switch is OFF position or the AC power cord is unplugged.) • • • on • • • dim • • • off ✽ 68 ✽ The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector. ✽ The projector is operating normally.
Appendix The projector is detecting abnormal condition. Indicators LAMP red READY green WARNING LAMP TEMP. REPLACE red orange ✽ ✽ The temperature inside the projector is elevated close to the abnormally high level. ✽ The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the READY indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment is limited when selecting these modes. ON-SCREEN DISPLAY VGA 1 VGA 2 VGA 3 VGA 4 VGA 5 VGA 6 VGA 7 MAC LC13 MAC 13 480p 575p RESOLUTION H-Freq.(kHz) V-Freq.
Appendix When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN RESOLUTION H-Freq.(kHz) V-Freq.(Hz) DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 640x480 720x480 720x575 800x600 1024x768 1366x768 1360x768 1376x768 1360x768 1366x768 1280x768 1280x768 1280x768 1280x800 1280x800 31.470 31.470 31.250 37.879 43.363 48.360 47.700 48.360 56.160 46.500 47.776 60.289 68.633 49.600 41.200 59.
Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 22.87” x 9.902” x 32.11” (581 mm x 251.5 mm x 815.5 mm) (Not including adjustable feet) Net Weight 80.3 lbs (36.5 kg) Feet Adjustment 0˚ to 5.7˚ Panel Resolution LCD Panel System 1.
Appendix ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. ● Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector.
Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 4 5 10 15 9 14 2 3 8 13 1 7 12 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input Sense 2 Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 1 2 3 4 5 6 7 8 T.M.D.S. Data2– T.M.D.S. Data2+ T.M.D.S. Data2 Shield No Connect No Connect DDC Clock DDC Data No Connect 9 10 11 12 13 14 15 +5V Power Ground (Vert. sync.) Sense 0 DDC Data Horiz. sync. Vert. sync.
Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set No: 4 3 2 1* * Should the four-digit number be changed, the factory set number will be invalid. While the projector is locked with the PIN code...
Appendix Dimensions Unit : inch (mm) 5.18 (131.5) 3.26 (82.8) 10.61 (269.5) 9.90 (251.5) 20.58 (522.7) 1.38 (35) 1° 3.66 (93) 16 22.93 (582.5) 32.11 (815.5) 5.7° 76 17.56 (446) 7.01 (178) 7.01 (178) 22.87 (581) 9.72 (247) 14.74 (374.5) 2.36 (60) 9.9 (251.5) 6.81 (173) 9.90 (251.5) 1.28 (32.5) 1.57 (40) 8.27 (210) 8.
Appendix Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation 1 Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.11) 2 Launch a communication software provided with PC and setup the communication condition as follows: 3 Type the command for controlling the projector and then enter the "Enter" key.
Appendix Status Read Command Format The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below.
EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : info@eiki.de China EIKI (Shanghai) Co.,LTD 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-0318 E-Mail : info@eiki-china.
