Owner`s manual

English
67
Power & Status
Power & Status
Click "Power & Status" on the main menu and configure each item.
1. Turn on/off the projector
Click Standby / ON buttons to turn off / on the projector. When pressing the Standby button,
the confirmation message will appear. Click OK to turn off the projector.
Note: Projector cannot be turned on for approximately 90 seconds after it being turned off. When the
display of "Power Status" changes from " On cooling down" to " On", click ON to turn on the
projector.
✐ Caution about turning on / off the projector via network ✐
When you wish to turn on / off the projector via network, preset the projector as follows:
1. Select "Setting" from the Projector menu.
2. Select "Standby mode" from the Setting menu and set it as "Normal".
If you set this function as Normal, the MCI is constantly provided with power even if the
projector is turned off. If you set this as Eco, then the MCI will be turned off when you turn
off the projector. Consequently, you cannot turn on / off the projector via network.
Confirmation Message
Select "Standby Mode" and set
it as Normal.