Owner`s manual

63
English
Preparation
2. Select the projector and click the PJ Controller button
* The projector showing "Connecting" cannot be controlled by PJ Controller.
* PJ Controller can control a single projector only.
3. PJ Controller is activated.
The screen below will be displayed.
The left side is "Main Menu". Select the setting item you wish to control/adjust.
Control items or condition items of the selected setting item are shown on the right side.
"Initial Setting "is shown on the initial screen.
r Press OK on the Options screen. The IP address and "MANUAL" will be shown on
the main screen.
The entered IP address
will be added.
PJ Controller button
Main Menu