Owner`s manual

English

Displaying image on the PC

screen to the Projector

Parameter Description

Automatic ........................................Automatically select the most suitable compression method..

Optimize for Performance ..............Optimize for switching speed of image.

Optimize for Quality ........................Optimize for image quality.

Optimize for Photo Images ............Select this when capturing photo images.

Compression Method

Parameter Description

Automatic ........................................Capture the image when any change occurs on the computer screen.

Always capture whole screen ........Constantly capture the image on the computer screen.

Screen Capture Settings *Reflected for Real-time Capture

4. Display the image on the computer screen to the MCI

Parameter Description

Real time Capture button ................Transmit the image to the projector in real-time.

One-shot Capture button ................Transmit the image to the projector when you press this button.

Stop Capture button ........................Stop the real-time capturing.

If the password is set, Password Input Screen will appear.

（Refer to Password Setting in "Chapter 8 Configuration with Browser" )

Memo: While executing real-time capture, no buttons can be clicked other than Stop button. The

transmitted image are kept in the MCI and displayed until the projector is turned off or the MCI

is restarted, even if you close the MCI Client.