Owner`s manual

52
8. Configuration with Browser
You can name the projector and set Interruptive Connection on this screen.
Parameter Description
Projector ..................................Name the projector(MCI) to distinguish it from others. (up to 32
characters). The name set here will be displayed on the main screen of
MCI client.
Accept Interruptive Connection ......Enable or Disable the interruptive connection to the projector which is
connected to other computer when you send images using MCI Client.
（See "9. Display Image via Network" for further detail.)
APPLY button ..................................If the contents you have set are correct, click the APPLY button. The screen
to restart the MCI will be displayed. To enable your new settings, click
RESTART button.
REFRESH button ............................Cancel the new settings.
RESTORE Factory Default
Settings button ......Restore the miscellaneous settings to the values at the factory.
Miscellaneous