Owner`s manual

51
English
Advanced Setup
The User Password can be set to restrict the access to the MCI.
The password different from the Admin Password can be set for the User Password.
When you reset the User password, you do not need to enter the current password.
At the factory, the User Password is not set.
If you do not need a password, enter "0000".
Parameter Description
Enter New User Password..............Input a new password you wish to set. The password you have input is
shown like “●●●●”. (4 figures)
Re-enter New User Password ........Re-enter the new password you wish to set. The password you have
input is shown like “●●●●”. (4 figures)
APPLY button ..................................If the contents you have set on this page are correct, click the APPLY
button. The screen to restart the MCI will be displayed. To enable your
new settings, click RESTART button.
User Password