Manualshelf

Owner`s manual

ManualsBrandsEiki ManualsComputer equipmentMCD-100
21222324252627282930
28
5. Software and Installation
9. Confirm if the installation is successfully completed.
Select [Start]→ [Program]→ [Multi Card Imager]→ [MCI Client] or double-click the "MCI
Client icon" on the desktop to start up MCI Client. If the screen below is displayed, the
installation is successfully completed. Click button on the top right hand corner.
※ MCI client does not operate at this point. Error message as below will be displayed.
Error message