Owner`s manual

20
4. Part Names and Functions, Factory Default Setting, Installation of MCI
項目
Factory Default Setting
LAN１ LAN２ LAN３
Configuration Set
〈LAN１〉 〈LAN２〉 〈LAN３〉
〈CONFIGURATION #〉
IP Address
〈169.254.100.100〉 <192.168.100.100> <192.168.100.100>
<IP ADRESS>
Subnet Mask
<SUBNET MASK>
<255.255.0.0> <255.255.255.0> <255.255.255.0>
Gateway Address
<GATEWAY ADDRESS>
<255.255.255.255> <255.255.255.255> <255.255.255.255>
IP Configuration Method Manual Setting DHCP Manual Setting
<IP CONFIGURATION> <MANUAL> <DHCP> <MANUAL>
ARP+PING Enable Enable Enable
<ARP + PING> <ENABLE> <ENABLE> <ENABLE>
Wireless Mode AdHoc Infrastructure AdHoc
<WIRELESS MODE> <802.11 AdHoc> <INFRASTRUCTURE> <802.11 AdHoc>
Channel
<WIRELESS CHANNEL>
<11> <11> <11>
SSID/ESSID
WIRELESS ANY WIRELESS
<WIRELESS SSID/ESSID>
<WIRELESS> <ANY（Assigned SSID/ <WIRELESS>
（Uppercase） ESSID is displayed）> （Uppercase）
WEP Encryption Disable Disable Disable
<WIRELESS WEP> <DISABLE> <DISABLE> <DISABLE>
DNS Domain - - -
DNS Address <255.255.255.255> <255.255.255.255> <255.255.255.255>
Contents of Factory Default Setting
Wireless LAN Card inserted （Set to "LAN3" at the factory）
項目
Factory Default Setting
LAN4 LAN5 LAN6
Configuration Set
〈LAN4〉〈LAN5〉〈LAN6〉
〈CONFIGURATION #〉
IP Address
〈169.254.100.100〉 <192.168.100.100> <192.168.100.100>
<IP ADRESS>
Subnet Mask
<SUBNET MASK>
<255.255.0.0> <255.255.255.0> <255.255.255.0>
Gateway Address
<GATEWAY ADDRESS>
<255.255.255.255> <255.255.255.255> <255.255.255.255>
IP Configuration method Manual Setting DHCP Manual Setting
<IP CONFIGURATION> <MANUAL> <DHCP> <MANUAL>
ARP+PING Enable Enable Enable
<ARP + PING> <ENABLE> <ENABLE> <ENABLE>
DNS Domain - - -
DNS Address <255.255.255.255> <255.255.255.255> <255.255.255.255>
Wired LAN Card inserted （Set to "LAN4" at the factory）
※Expressions in < > are names projected on the screen when the Test Switch is pressed.