Instruction manual

OPERATOR TROUBLESHOOTING GUIDE
SYMPTOM CHECK
-------r
No power to motor or lamp 1. Be sure proje c tor is plu gged in
(Pilot lamp not on) and t he out l et has power
Motor runs but film doesn't
advance
Motor ru ns too fast or too slow
2. Check power cord
3. Motor · thermal fuse is defect ive
or motor module is not plugged
in
1. Motor belt off or broken
2. Check position of stil l picture
lever
1. Belt not on the correct mo t or
pulley
--J.-~
~ooetso~;~:~;~:nadvances, lamp II : ~~~~;~~~ 1::;~Ch not in l amp
3. Transformer mo dule l amp plu g
I discon nected or defective
Won't thread properly
~ channel and re w ind lever
No sound (Excite r lamp on)
No sound (Exciter lamp not on)
I not in the operate position
, 2. Fil m gate not proper ly closed
3. The automat ic threading co nt ro l
lever
not pushed to the thread
pos iti on
1. Amp lifier vo lum e contro l not
turn ed up
2. On magnetic playback models
make s ur e switch is in the
correc t position
3. 2 amp amplifier fuse defective
1. Amplifier vo lum e control not
turned on
2. Defective exciter lamp
3. 2 amp exciter l amp fuse defec-
tive
4. Amplifier not plugged in
22