Instruction manual

CHANGING LAMPS
e. * Disconnect power cord.
PROJECTION LAMP (ELC/24V 250W)
To open the lamp house door, remove the lock screw and pullout from
the top of the lamp house.
J:"=_~ .. ~~-""---- LAMP -HOUSE LOCK SCREW
Remove the black heat shield, by
pulling straight towards you .(Fig. B)
(Caution shield may be not)
Push to left ejection lever imme -
diatey above lamp and Lamp will
come out (Fig.C). Be sure replace -
ment lamp snaps into place.
Proper s
ea ting of lamp is essential.
13