Instruction manual

PROJECTING
1. Turn function switch to FOR-
WARD position (.r. g ) and
LAMP on position ( ~~ , (]~ ).
2. Focus picture. Frame film by
adjusting the framing lever.
(Fig. A)
3. Turn volume switch on and adjust
tone controls.
4. For STILL PICTURE, depress
STILL PICTURE LEVER (Fig.
B). (Focus adjustment may
be
necessary.) If shutter has stopped
in
front of picture, it may be
moved by turning inching knob
either direction until picture STOP
shows on screen.
5. For REVERSE PROJECTION,
turn function switch from STOP
position to R EVE RSE ( t. ~ )
and LAMP on Position ( ~ E ).
6. When film is completed, turn function switch to FORWARD position
( 4 rJJ ) and let motor run until all film is on the take-up reel.
10