Instruction manual

Problem: Try these Solutions:
Picture is T/Binverted .Check Reverse T/B feature.
(See “OTHER FUNCTION SETTING” section on page 47).
Picture is L/R Reversed.
Check Reverse L/R feature.
(See “OTHER FUNCTION SETTING” section on page 47).
Some displays are not seen
during the Operation
Check Display feature.
.(See “OTHER FUNCTION SETTING” section on page 47)
.
No sound.
• Check audio cable connection from audio input source.
•Adjust audio source.
• Press the VOLUME (+) button.
• Press the MUTE button.
Remote control unit doesn’t
work.
• Check the batteries.
between the remote control sensor and remote control unit.
• Make sure you are not too far from the projector when using
the remote control unit. {Maximum operate range 16.4 feet (5
m)}.
Wireless mouse function does
not work
• Check the cable connection between the projector and the,
computer.
• Check the mouse setting on your computer.
•Turn on the projector before you turn on the computer
.