Manualshelf

Instruction manual

ManualsBrandsEiki ManualsProjectorLC-XlU
41424344454647484950
OTHER FUNCTION SETTING
This projector has other function settings; Blue back, Display, Reverse T/B, Reverse R/L and Split wipe. BLUE BACK
When this function is in the “On” position, the projector will project a blue image without video noise on the screen when the
video source is unplugged or turned off.
DISPLAY
When this function is in the “On” position, on-screen displays always appear when adjustments are made. Although these on-
screen displays are very helpful, these may spoil the view if adjustments are made during presentations. The certain displays do
not appear when display switch is “Off”. The following displays do not appear.
• Wait Display
• Mode Display
• Volume Display
• Mute Display
• Zoom/Focus/Lens shift Display
• Normal Display
• No show Display
REVERSE
T/B
When this function is in the “On” position, the top/bottom
picture invert.
REVERSE L/R
When this function is in the “On” position, the left/right picture reverse
capability lets you project onto a rear projection screen.
SPLIT
WIPE
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image side ways
when the input source is changed.
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and the next
one appears from the center to side ways like drawing the black curtains.
SETTING THE BLUE BACK, DISPLAY, REVERSE T/B, REVERSE L/R AND SPLIT WIPE
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON. Another
dialog box SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to an item you want to set by pressing the POINT UP/DOWN BUTTON(s).
5. If you want to change the setting (On or Off), press the SELECT (REAR CLICK) BUTTON.
6. To quit the MENU, point to Quit and then press the SELECT (REAR CLICK) BUTTON.
7. The settings are permanently kept even if the MAIN ON/OFF is switched off.