Service manual

LC-XIP2000 Service
Manual Ver. A
57
RS232 Command
RS232
command
- Connection :
1. Use RS-232C-to-PS2 cable (part number: 13660016)
2. Connect with RS232C port of projector
- If RS232 command doesn’t work:
Please check
- The baud rate setting is 9600 or 19200
- Is the port you select correct? For example “com 1” or “com 2”
- Make sure you key in command, for example command “power on ”:
Correct : C00CR ( ASCII) or 43 30 30 0D ( HEX )
incorrect : C00 ( ASCII) or 43 30 30 ( HEX )