Service manual

LC-XIP2000 Service
Manual Ver. A
55
E) Contrast and Brightness Calibration
a. Select pattern as fig 7
Note :
Model XGA: select “XGA EX17 C&B”.jpg
Model SVGA: select “SVGA EX17C&B”.jpg
b. Select OSD→ Picture→
Display mode→ Natural mode
(as fig 8)
c. Enter “Service mode“
(Press “POWER→ AUTO→
MENU“ on keypad)
fig 7
d. Select page “System Inf “
e. Select “C & B Calibration “ fig 9
f. Press “right key “
g. Confirmation information shows
up as fig 10
h. Press “right key “
fig 8
fig 9
fig 10
Service mode
& Calibration
( Please ask Service Center for these files. )