Service manual

LC-XIP2000 Service
Manual Ver. A
51
II) Service mode :
A. Set Up 01
A-1: Firmware Version: The firmware version which used at the
projector.
A-2: Build Date : Firmware build date
A-3: Temp01 : Temperature of inlet ventilation area
A-4: Temp02 : Temperature of projector lamp
A-5: Lamp Timer : Lamp operation hours. It will be reset after
execute Lamp Timer Reset function.
A-6: Lamp Total Timer: The total system operation hours which
can not be reset.
A-7: GVer : Gamma Version
A-8: PVer : PIC Version
fig 2
Service mode
& Calibration
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8