Manualshelf

Owner`s manual

ManualsBrandsEiki ManualsProjectorsLC-XIP2000
31323334353637383940
Installation(contiuned)
Software and Hardware install
2.Section two : Software and Hardware driver installation
Step 10-A: Turning on the projector
POWER
Remove
the
lens
cover.
Connect
the
projector’s
power
cable
with
the
projector,
and
insert
the
power
cable
into
a
wall
socket.
Turn
on
the
AC
power
switch
of the projector.The
power
indicator
lights
green
and
slowflashing.
Projector works
in
standby
mode.
Press
the
power
button
to
turn
on the projector.
T
he power LED
begins to green and lamp LED begins to red, and the projector
will
be
lamped
on.
33
Downloaded From projector-manual.com EIKI Manuals