Owner`s manual

Part Names and Function:(continued)
Rear View / IO Board
12. Rear IR receiver
Inlet ventilation
10. Power socket
11. Power switch
5. S-video
9. USB mouse connector
4. RS-232C
3. Monitor out
1. Computer in 1
2. Computer in 2
/ YPbPr
7. Audio out
8. Audio in
6. Video in
1. Computer in 1
Input Analog RGB video signal from a computer
2. Computer in 2 / YPbPr
When input signal from computer in 2, it may encounter incorrect
picture color. Please press "Auto" button again. The picture will be
corrected.
3. Monitor out connector
Connect an external monitor to this connection view the Computer i
n
1
input.
4. Control (RS-232C)
Serial data port for controlling the projector with a computer or other
RS-232 control device.
5. S-Video connector
S-Video signal from a video source.
6. Video in
Component video signal from a video source.
16
Downloaded From projector-manual.com EIKI Manuals