Owner`s manual

43
Video Input
Video System Selection
1
AV System Menu (Video or S-video)
AV System Menu (Component)
2
If the projector can not reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector can not reproduce proper video image, select
a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Auto
Note:
The AV System Menu can not be selected when selecting
RGB (Scart).
Video
Component
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Video, S-video
or Computer 1(Component) and then press the
SELECT button.
3
Use the Point ▲▼ buttons to select System and then
press the Point ► or the SELECT button. Use the Point
▲▼ buttons to select the desired system and then
press the SELECT button.
Video or S-video
Component