Owner`s manual

42
Video Input
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Input Menu
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Menu Operation
Note:
• Network is for the Network function. See the owner’s
manual of “Network Set-up and Operation” .
• When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.49).
COMPUTER button
Top Control
INPUT button
Remote Control
VGA
Computer1 ((RGB) /
(Component) / (Scart))
Computer2 (RGB(PC digital) /
RGB(AV HDCP) / RGB(Analog))
1
2
Use the Point ▲▼ buttons to select Computer 1 and
then press the Point ► button.
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
Component
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
RGB (Scart)
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
3
Use the Point ▲▼ buttons to select Component or
RGB(Scart) and then press the SELECT button.
Video
S-video
Computer2 (RGB(PC
digital) / RGB(AV HDCP) /
RGB(Analog))
Network
Computer1 ((RGB) /
(Component) / (Scart))