Owner`s manual

31
Choose either Computer 1(RGB) or Computer 2 (RGB(Analog)) by pressing the INPUT button on the top
control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Input Source Selection (RGB: Computer 1/Computer 2(Analog))
Computer Input
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.49).
VGA
Computer
1
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select either Computer
1 or Computer 2 and then press the Point ► button to
access the submenu items.
When Computer 1 is selected, use the Point ▲▼
buttons to select RGB and then press the SELECT
button.
When Computer 2 is selected, use the Point ▲▼
buttons to select RGB(Analog) and then press the
SELECT button.
COMPUTER button
Remote Control
Computer1 ((RGB) /
(Component) / (Scart))
Computer2 (RGB(PC digital) /
RGB(AV HDCP) / RGB(Analog))
Top Control
INPUT button
Video
S-video
Computer2 (RGB(PC
digital) / RGB(AV HDCP) /
RGB(Analog))
Network
Computer1 ((RGB) /
(Component) / (Scart))