Owner`s manual

29
Basic Operation
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER, VIDEO or NETWORK button on the
remote control to select the input source. See pages 31-32,
41-42 for details.
Refer to the owner’s manual of “Network Set-up and
Operation” for details about the network input.
COMPUTER/VIDEO/NETWORK button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
Fig.1 will appear on the Screen menu while the Freeze
function is working.
FREEZE button
Display the input source information: Input, H-sync freq.,
V-sync freq., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock
and Remote control (p.62).
INFO. button
Press the D.ZOOM +/- buttons on the remote control to
enter to the Digital zoom +/– mode. See page 40 for details.
D.ZOOM +/- buttons
Remote Control
FREEZE button
D.ZOOM+/-
buttons
INFO.
button
LAMP
button
Note:
See the next page for the description of other
buttons.
LAMP button
COMPUTER
button
NETWORK
button
VIDEO button
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness.
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Fig.1